Rokonet Orbit-6 Manuel d'utilisateur télécharger pdf (Page 21)

User Manual

BYPASSING A ZONE (CONT.)

If the system is programmed for quick bypass the following

option is available:

Quick

Bypass

To bypass a zone simply press the corresponding keypad

number for at least 2 seconds.

An additional zone(s) can be bypassed at the same time by

adding its number to the sequence. For example, to bypass

Zones 2 and 3, press:

[ 2 ] for 2 seconds + [ 3 ]

The same sequence can “toggle” the bypass(es) during the

disarmed period so that they may be either applied or

removed.

The READY LED, when flashing, indicates that there is one

or more bypassed zones. Any zone(s) bypassed during the

disarmed period will remain bypased when the system is

armed.

Zone(s) that are bypassed, during the time the system is

armed, will automatically be restored to its normal,

unbypassed condition, when the system is disarmed.

DETERMINING WHICH ZONE(S) IS BYPASSED

STEP DESCRIPTION

The system must be

disarmed. If the keypad’s

READY LED is flashing,

there is at least one

bypassed zone, in the

system. To determine

which zone is bypassed,

follow this sequence:

If quick bypass is enabled in your

system, simply press:

Observe the keypad’s ZONES area. LED(s) corresponding to the

bypassed zone(s) will light for several seconds.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Pas de commentaire

Rokonet Orbit-6 Manuel d'utilisateur Page 21